Explore our core selection of high-performance architectural and roadway luminaires, precision-manufactured for optimal energy savings and extreme weather durability.
Urbanization, rising energy costs, and rigorous carbon reduction mandates have accelerated the conversion of traditional high-pressure sodium (HPS) and metal halide (MH) fixtures to modern solid-state LED systems. Among all wattage classes, the 150W LED street light represents the primary sweet spot for municipal and commercial roadway developments globally.
Designed to replace legacy 250W to 400W HID luminaires, 150W LED setups provide an optimal blend of high lumen output, energy conservation, and cost-efficiency. They are universally specified for Class M1, M2, and M3 roadways, including high-speed regional arterials, key municipal boulevards, and commercial center parking infrastructures.
By integrating advanced optics, rugged die-cast aluminum enclosures, and smart control nodes, today's 150W systems not only minimize direct electricity consumption by up to 70% but also drastically lower maintenance cycles, supporting municipal targets for smarter, more sustainable infrastructure.
Discover the core engineering parameters that distinguish high-tier industrial street lamps from low-grade alternatives.
Modern premium 150W systems feature standard nominal efficacies ranging from 140 lm/W to 170 lm/W, delivering up to 25,500 total lumens. This ensures maximum photometrical coverage with minimized active power draw.
Utilizing high-purity UV-stabilized polycarbonate or optical-grade PMMA lenses, these systems deliver precise Type II, Type III, or Type IV light distributions, minimizing backward glare and trespass while maximizing uniformity.
Engineered using low-copper ADC12 die-cast aluminum heat sinks. Streamlined vertical cooling fins prevent dust accumulation and dissipate thermal load directly, maintaining junction temperatures under 75°C.
Equipped with standard NEMA 7-pin or Zhaga Book 18 interfaces, our configurations support smart drivers from brands like Philips Xitanium or Inventronics, enabling 1-10V/DALI dimming, LoRaWAN, and Zigbee.
Achieving IP66 ingress protection and IK08/IK09 mechanical impact resistance, the fixtures are completely sealed against heavy downpours, wind-blown grit, and high-impact physical vandalism.
Integral high-capacity surge protection devices (SPDs) shield sensitive LED drivers and arrays from transient voltage surges up to 10kV/20kV, mitigating risk from lightning strikes and grid fluctuations.
Established in 2003 and located in Ningbo, China, Austar Lighting Co., Ltd. is a prominent manufacturer of high-quality LED street lighting and architectural outdoor fixtures. Occupying a modern 10,000㎡ production facility, our company is staffed by over 100 dedicated technical professionals, including 10 technicians and 5 senior design engineers.
In collaboration with leading Italian design partners, we merge European architectural design standards with highly competitive manufacturing models. This synergy enables us to export 100% of our products, serving municipalities, contractors, and retail networks across 55 countries and regions worldwide.
With an annual production capacity exceeding 150,000 units, we maintain rigorous production standards. All products are compliant with ISO9001-14000 quality systems and hold recognized international certifications, including ENEC, CB, CE, and LVD, ensuring they meet the safety and performance demands of diverse global markets.
Our commitment to reliability is backed by a fully equipped, modern testing laboratory and heavy industrial machinery.
To ensure every 150W LED street lamp operates reliably in extreme environments, our factory integrates heavy-duty die-casting machinery (1000T, 700T, and 300T), a fully automated electrostatic powder-coating line, three lean assembly lines, and two dedicated LED driver aging bays. Additionally, our testing laboratory is equipped with precision photometrical and environmental validation instruments.
Discover our core designer lines, optimized for high performance, modern architectural integration, and visual comfort.
How 150W LED installations are strategically deployed to solve challenging outdoor public and commercial lighting requirements.
150W LED street lights are designed to meet strict luminance standards on urban roads. Deployed at mounting heights of 8 to 12 meters, these fixtures deliver uniform horizontal illumination, helping to improve traffic safety and visibility on public roadways.
Featuring high-grade ADC12 aluminum housings protected by anti-corrosion powder coating, our fixtures withstand salt-spray exposure in coastal infrastructure, marine ports, and high-humidity areas.
Ideal for distribution hubs, industrial parks, and high-capacity loading bays. These fixtures provide continuous, high-output illumination for security operations while reducing utility costs and carbon footprint.
Exploring the integration of solid-state lighting with municipal IoT systems, edge computing, and green design.
Street lighting is evolving from independent units into connected infrastructure. By utilizing standardized Zhaga Book 18 receptacles, our 150W luminaires can easily integrate plug-and-play smart nodes without requiring rewiring.
Compatible with D4i standards, these smart nodes allow the luminaire to report energy use, diagnostic data, and run hours in real time back to central municipal dashboards, streamlining maintenance cycles.
To reduce light pollution and protect nocturnal wildlife, our modern optical distribution profiles feature a zero-uplight rating. By eliminating light spill above the horizontal plane, we focus illumination only where it is needed on the roadway, ensuring compliance with local Dark Sky initiatives.
Detailed technical answers to common queries regarding 150W LED roadway design and manufacturing standards.
Our sales and technical teams will reply within 12 hours on workdays. We provide detailed photometric files (.IES), specification sheets, and project pricing.
We are a direct manufacturer. Our facilities in Ningbo include a luminaire assembly plant and a support factory. We handle the process from die-casting to final shipping, ensuring quality control and competitive pricing.
We primarily manufacture outdoor LED street lights, garden luminaires, plant grow lights, architectural wall lights, decorative posts, and coordinating public street poles.
Our street and architectural lighting ranges are widely used in urban highways, municipal roads, pedestrian bridges, public parks, industrial zones, shipping ports, and warehouse peripheries.
Yes. We can design and manufacture components or complete custom luminaires based on client drawings, samples, or photometric specifications. Our design team works with Italian design standards to create customized options.
Our 10,000㎡ factory features 1000T, 700T, and 300T high-pressure die-casting machines, an automated electrostatic powder-coating line, three assembly lines, and two aging lines. Our annual output reaches 150,000 sets of street lamps and posts.
We are certified to ISO9001 and ISO14001 standards. We perform in-process quality control at each production stage, followed by a final inspection of all finished products. Testing includes darkroom photometrics, EMC validation, integrating sphere testing, salt spray, and vibration testing.
We use laboratory testing equipment, including spectrum analyzers, full goniophotometric darkrooms, water spray testing setups, impact testers, and high/low temperature chambers.
We confirm terms during the quoting stage (FOB, CIF, CNF). Standard terms include a 30% deposit with the balance payable against the bill of lading (B/L) copy. We accept T/T and L/C payments.
We primarily ship by sea through the nearby Port of Ningbo, which helps keep freight costs competitive. Urgent orders can be shipped by air via Ningbo or Hangzhou airports.
We export to markets including Germany, Spain, Italy, the UK, the US, Japan, South Korea, Australia, Canada, and Latin America.
We collaborate with Italian design partners and our in-house engineering team. We manage the design process from concept development to mold creation.
We can design, mock up, and finalize tooling for a new luminaire within one month, allowing for rapid customization.
We ship out of the Port of Ningbo or Port of Shanghai. Air transport is handled through Ningbo Lishe Airport or Hangzhou Xiaoshan Airport.
Our street lights are designed for a lifespan exceeding 50,000 hours (L70B50 rating at 25°C). We use premium LED chips and drivers to maintain stability and performance over time.
Complete list of our wholesale outdoor lighting configurations and architectural pendant luminaires.
For inquiries about our products, customization options, or bulk pricelists, submit your details below and a representative will contact you within 24 hours.
Austar
